CAR BUILDING RULES
CAR BUILDING RULES
Embedded Files
DOWNLOAD LFS EDITOR
https://www.lfs.net/downloads- LFS Editor - Guides
- CGTrader - 3d models of cars
- Complete starting guide to create your own vehicle mod by AHPP
HOW TO BUILD CAR FOR THE SERIES?
- Build your car according to these rules below with LFS Editor
- Somebody build for you your own mod? Contact GM official trusted mod builders at discord
- In order a do your own mod for the series you have to be registered GRIP Masters eMotorsport driver
- Your mod has to be private (custom access) only for you
- Do your own private MOD by your own LFS account
- When the mod is passed LFS mods inspection contact #16 J.Hautanen at discord
CAR PUBLISH NAME
Name the car for the series class like this.EGM_YOUR CAR NAME
APPROVED eGM TOURING CAR
- Mod has to be based on real life road model passenger car
- Drivetrain has to be the same what it was in the factory
- If the factory parts allow to make car 4WD to RWD or FWD you can do it. You have to just prove it to eGM admins.
- Engine has to be brands own engine. If body is Toyota the engine has to be also Toyota.
MOD BUILDING RULES
MOD BUILDING RULES
- Vehicle type: Touring car
- Steering lock: 20 degrees
- Transmission: H-pattern gearbox
- Numbers of foward gears: Six (6)
Driving assists: Four (4) options
- Live adjust brake balance
- Shift light
- Handbrake
- Starter motor
Drivetrain: Three (3) options
- Front wheel drive [FWD]
- Rear wheel drive [RWD]
- Four wheel drive [4WD]
Suspenssion: Four (4) options
- MacPherson Strut - front & rear
- Double Wishbone - front & rear
- Trailing Arm - rear
- Linear - rear
LIGHTS
- Rear brake lights has to work properly
INTERIOR
- Car has to have rollcage, racing seat, racing belts and incar name/number info plate installed. [LFS Editor FILES]
MASS
MASS
- Fuel tank: 30 liters (max)
- Suspenssion mass constant: 0.200 (min)
- Driver side: Left or Right (cannot be middle of the car)
- Car Mass (without driver & fuel): 1230kg
- Car Total mass: 1300kg with driver & without fuel
WEIGH DISTRIBUTION (with driver & and fuel full tank)
WEIGH DISTRIBUTION (with driver & and fuel full tank)
- Front engine cars: Weight cannot go over 50% on rear axel
- Middle engine cars: Weight distribution has to be between max 55% front or max 55% rear.
- Rear engine: Weight distribution cannot go over 40% in front axel
Engine location has to be realistic as in the real life car
ENGINE
ENGINE
- Engine cylinders: 3 - 8 + (rotary wankel 1-2 cylinders)
- Engine layout: Inline, Flat or V
Engine Size
- 1400cc - 1949cc = turbo & supercharged
- 1950cc - 4400cc = na & turbo & supercharged
- Inertia Mul: 1.4 - 2.0 (min)
- Turbo: Allowed
- 2-stroke: Allowed for rotary 1-2 cylinders
- Engine audio: Gasoline or diesel (NO CLIPPING)
- Power: 300hp & 300nm (max)
- Redline: 9500rpm (max)
WHEELS
Inch size: 17 - 20"
inch width: 7 - 8.5"
TYRES
- Front: SLICK R1 - R4
- Rear: SLICK R1 - R4
- Width: 205 - 225
- Profile: 35 - 45
- Tyre pressure: 0 - 700kpa
- Rim protector: YES if you want
- Grooved slicks: NO
FORCED AERODYNAMIC VALUES
FORCED AERODYNAMIC VALUES
Except 4WD body drag is: 0.355 N @ 1 m/s
STEERING LOCK
Maximum lock is limited to 20 degrees
Tip: Set your steering wheel turn (ONE WAY) 240 degrees.
Look that your tyre dont hit at full lock in your wheel arch
CAR BODY
Car body outside has to look a like the car what is it in real life
You can add small touring car front wing.
You can add small touring car rear wing.
LOD RULES
Lod1 is your actual mod
You need to do also atleast Lod2
Lod2 makes your car shadows and colission edeges.
If you make Lod3 it will make your colission edges.
Lod2/3 collision edges have to follow lod1 outer body lines.
Add your lod1 skin template to lod2 and lod3.
COG RULES
COG height above ground: 0.300 (min) (include driver without fuel)
When you adjust this set car suspenssion ZERO SPRING TEST = YES
OTHER MASS RULES
All object masses like driver, seats, fuelt tank, battery and engine has to stay in car mass frame. Car tube masses has to follow LOD1 wire frame. All masses has to stay inside LOD3 and LOD3 has to follow LOD1 body frame lines. Wheel masses cannot go over the LOD1 wheel arches.
SKIN TEMPLATEMod has to have good working skin template.
DEFAULT RACING SKIN
Default racing skin has to have these stickers/logos.
You can freely paint the car and add your sponsor stickers what you want
Do not use real company logos in your mod skin when you upload it to LFS mods. Upload the real used racing skin to lfs.net/account/skins.
Windshield banner (your current class logo on it)
Two (2) GM door banner bolth sides
Incar number&name sticker (your current class logo on it).
Your country flag on the roof
Stickers and logos for the skin you can find at discord in #sticker-set section.
Page updated
Google Sites
Report abuse